Power supply
33
(ENG) DVQX2103
Charging the battery
The battery is not charged at the time of purchase. Use only after charging sufficiently.
It is recommended that you have one extra battery.
≥
It is recommended to perform charging of the battery in a location with ambient temperature
of 10 °C to 30 °C (50
o
F to 86
o
F) (same for the battery temperature).
≥
Use the supplied AC adaptor. Do not use the AC adaptor of another device.
≥
The supplied AC cable is dedicated for this unit. Do not use with any other device. Also, do
not use AC cable from other device on this unit.
≥
The battery is not charged when the power is on.
1
Connect the AC cable to the AC
adaptor and the AC outlet.
≥
Insert the plugs as far as they will go.
2
Connect the AC adaptor to the
<DC IN 12V> terminal.
≥
As the charging lamp lights up green,
charging starts. It will turn off when the
charging is completed.
≥
If the charging lamp flashes, refer to
page 13.
≥
The DC plug of the AC adaptor,
depending on its angle, may block your
view of the charging lamp. To check the
charging lamp status, adjust the angle
of the DC plug.
∫
Connecting to the AC outlet
It is possible to use this unit with power supplied from the AC outlet by turning on the unit with
the AC adaptor connected.
Even when you use the AC adaptor for recording images, keep the battery connected.
This allows you to continue the recording even if a power failure occurs or the AC adaptor is
unplugged from the AC outlet by accident.
≥
The AC adaptor is in the standby condition when the mains plug is connected. The primary
circuit is always “live” as long as the AC adaptor is connected to an electrical outlet.
AG-CX7_CX8_CX10-DVQX2103_eng.book 33 ページ ２０２０年１月６日 月曜日 午後２時４８分
