Panasonic AG-CPD15P Скачать руководство пользователя страница 122

Страница: 122 / 140

122

Status Display

The Status Display shows messages about the operating status of the P2 card
and this unit. Take action as appropriate for each status.

Status Display

Measure

CARD FULL

8 GB or lower capacity P2 cards:

     The following conditions may have occurred.
•  There is no space left on the P2 card.
•  The P2 cards inserted in P2 card slots 1 and 2 contain

20,000 or more files.

Replace the P2 card with a P2 card with free capacity, or

free up space in the P2 card for new data.

16 GB or higher capacity P2 cards:

     The following conditions may have occurred.
•  There is no space left on the P2 card.
•  The P2 cards inserted in P2 card slots 1 and 2 contain

20,000 or more files.

• The maximum number of files that can be recorded has

been exceeded for that day.

• The number of recording days has been exceeded
Replace the P2 card with a P2 card with free capacity, or

back up the data on the P2 card and reformat it.

CARD PROTECT The write-protect switch of the P2 card is set to “PROTECT”.

Move the switch to enable writing.

VUP CARD

Writing is not possible on a P2 card intended for version

upgrade. Replace the card with one that is not intended for

version upgrade.

UNFORMATTED

The P2 card is not formatted. Replace it with a formatted card.

REFORMAT

P2 card data has been modified on another device.

Upload or export data to back it up and reformat the card.

RUNDOWN

A P2 card is nearing the end of its service life.

While it will still be possible to record and play back a P2 card after

this message has appeared, you are recommended to replace it.

ILLEGAL CARD • An unusable card is inserted.

Check the type of card.

• The inserted P2 card cannot be recognized.

Replace it with a compatible card.

• The P2 card is not inserted correctly.

Remove and re-insert the card correctly.

NO CARD

No P2 card is inserted. Insert a P2 card.

READ ERROR

An error occurred while reading. File playback is not possible,

or the associated meta information cannot be displayed

correctly.

META ERROR

No associated meta information file exists. The information

cannot be displayed.

PLAY ERROR

A decoder malfunction occurred. Playback is not available.

Reboot this unit.

Содержание AG-CPD15P













































































































































Результаты поиска

Содержание AG-CPD15P

Отзывы:

Похожие инструкции для AG-CPD15P

Бренды по названию

Популярные бренды

Panasonic AG-CPD15P, Руководство по эксплуатации

Результаты поиска

Содержание AG-CPD15P

Отзывы:

Похожие инструкции для AG-CPD15P

Бренды по названию

Популярные бренды