Panasonic AG-CPD15P Скачать руководство пользователя страница 117

Страница: 117 / 140

117

roubleshooting

and Reference

Error messages

(continued)

No.

Message

Measure

E02461 Couldn’t delete files.

Check the card information, and proceed

as follows according to the information.

CARD PROTECT:

Release the write-protect switch of the

P2 card.

UNFORMATTED:

Replace with the formatted P2 card.

REFORMAT:

Upload or export data to back it up and

reformat the card.

NO CARD:

Insert a P2 card.

Others:

Replace the P2 card with another one.

E02470 System error

Couldn’t restore files.

Contact your supplier.

E02471 Couldn’t restore files.
E02481 Write error on slot1.

Record cannot be continued.

Be sure to use the correct procedure

to remove and load P2 cards. Replace

a P2 card that is not recognized after

inserting it in the P2 card slot and

closing the P2 card slot cover.

E02482 Write error on slot2.

Record cannot be continued.

E07671 Camera communication error.

Camera cannot be controlled.

The Color Camera may not be correctly

connected. Check whether the camera

cable (included in the Color Camera)

is correctly connected to the Color

Camera. Contact your supplier if this

measure does not solve the problem.

E08601 Lid open.

Playback and record cannot

be performed.

Close the P2 card slot cover.

E08602 The recorder’s fan has

stopped.

Contact your supplier.

E10400 Radar model file not found.
E10401 More than five radar model

files found.

E10402 Invalid radar model file found.
E10403 Radar model file read error.
E10410 Radar communication error.

Please check the radar setting.

E15751 Card is run-down.

Replace P2 card on slot1.

A P2 card is nearing the end of its

service life. While it will still be possible

to record and play back a P2 card after

this message has appeared, you are

recommended to replace it.

E15752 Card is run-down.

Replace P2 card on slot2.

Содержание AG-CPD15P













































































































































Результаты поиска

Содержание AG-CPD15P

Отзывы:

Похожие инструкции для AG-CPD15P

Бренды по названию

Популярные бренды

Panasonic AG-CPD15P, Руководство по эксплуатации

Результаты поиска

Содержание AG-CPD15P

Отзывы:

Похожие инструкции для AG-CPD15P

Бренды по названию

Популярные бренды