Panasonic AG-CPD15P Скачать руководство пользователя страница 120

Страница: 120 / 140

120

Error messages

(continued)

No.

Message

Measure

E20922 Unsupported Control Panel

Detected!

A Remote Control Panel not supported

by this unit was detected.

Disconnect the Remote Control Panel.

E22420 Officer’s information file

cannot be loaded.

The officer data file (WID

∗∗∗∗∗

.TXT) is

corrupted. Create a new officer’s data

file, save it to a USB memory device

and re-register it.

E22421 Since you are not an

administrator, you cannot

open this menu.

You are not registered as an administrator

and cannot open this menu. Ask a

registered administrator for assistance.

E22422 Officer’s information file

cannot be loaded.

There is no Officer Registration file

or it contains the wrong data. Create

a correct Officer Registration file

(WOFFICER.TXT), copy it to a USB

memory device and reload it.

E22423 Admin’s information file

cannot be loaded.

There is no Administrator Registration

file or it contains the wrong data. Create

a correct Administrator Registration

file (WADMIN.TXT), copy it to a USB

memory device and reload it.

E22424 Officer’s information cannot

be setup during record !

Officer data cannot be changed during

recording. Stop recording and start over.

E22425 Cannot load Event Type.

There is no event type file or the content

of the file is incorrect. Copy the correct

event type file (EVTYPE.TXT) to the

USB memory device and reregister it.

E22426 Menu copy failure.

Connect a write-enabled USB memory

device.

E22620 Auto Maintenance Canceled

Auto maintenance was not performed

because the P2 card slot cover was open

or because recording was in progress.

E25410 GPS communication error.

Please check the GPS module.

An error occurred in the GPS module.

Consult your supplier.

E28201 A capacity of USB strage is

not enough to export.

Use other USB memory device that is

not full.

E28202 Export is complete.

Restore file remained.

Restore the file not yet restored, and

export it again.

E28203 File not found in P2 cards.

There are no files to export. No export

operation needed.

E28400 No USB storage devices.

Couldn’t start export.

Connect a USB memory device.

E28401 Found read only P2 cards.

Couldn’t start export.

Set the P2 card write-protect switch

away from the write-protect position.

Содержание AG-CPD15P













































































































































Результаты поиска

Содержание AG-CPD15P

Отзывы:

Похожие инструкции для AG-CPD15P

Бренды по названию

Популярные бренды

Panasonic AG-CPD15P, Руководство по эксплуатации

Результаты поиска

Содержание AG-CPD15P

Отзывы:

Похожие инструкции для AG-CPD15P

Бренды по названию

Популярные бренды