30
31
Setting and checking of BOX using parameter setting application
The procedure below explains how to set the BOX with use of the parameter setting application.
1. Application start-up
2. Application setup
3. Reading parameter
4. Editing parameter
5. Save parameter
6. Update parameter
Application start-up
Start-up
Execute "SettingParameter" on the desktop.
→
→
The start-up window will be displayed.
Be sure to set the save folder*.
Specify the save folder on the "Browse For Folder" window.
* The
save folder is a folder for parameter reading and saving.
E.g.) When the save folder is "C:\panasonic\box",
The
save folder for the setting file of the BOX that is set to "192.168.10.10" is shown below.
"C:\panasonic\box\192168010010\box.tar.gz"
If the save folder is not specified, the parameter setting application is terminated. Therefore, be sure to specify
the save folder.
The save folder cannot be changed after start-up of the parameter setting application. If the save folder needs
to be changed, exit from the parameter setting application, make a restart, and make a resetting.
Caution:
•
The parameter setting application can't be multi-started.
•
When "boxip.csv" is included in the save folder, the file is read and displayed in the BOX IP List. Refer to
"<application installation folder>\default\boxip.csv" for the "boxip.csv" format.
