Panametrics GF868, Руководство по программированию, Страница: 45 / 167

12/1/99
1-38 Programming Site Data
The SYSTM Sub-Menu
(cont.)
The abbreviations and definitions of all the available mass flow units
are shown in Table 1-6 below. The choices shown on the option bar
are determined by the selection made at the
SYSTEM UNITS
prompt
screen.
Note:
The option bar above shows English units. If Metric units are
specified in the
GLOBL menu, these will appear instead.
The abbreviations and definitions of all the available volumetric and
totalizer units are shown in Table 1-6 above. The choices shown on
the option bar above are determined by the selection made at the
SYSTEM UNITS prompt screen.
Table 1-6: Available Mass Flow Units
English Metric
LB = Pounds KG = Kilograms
KLB = Thousands of LB TONNE = Metric Tons (1000 KG)
MMLB = Millions of LB
TONS = Tons (2000 LB)
Chan 1 SYSTM
Press [F1]-[F4] to select the
desired time units for the mass
flow rate display.
MASS FLOW
current setting appears here
MASS FLOW TIME
current setting appears here
/SEC /MIN /HR /DAY
Chan 1 SYSTM Press
[F1]-[F4]
to select the
desired number of digits to the
right of the decimal point in the
mass flow rate display.
MASS FLOW TIME
current setting appears here
MDOT DECIMAL DIGITS
current setting appears here
0 1 2 3
Chan 1 SYSTM
Press [F1]-[F4] to select the
desired units for the totalized
mass flow display
.
MDOT DECIMAL DIGITS
current setting appears here
MASS (TOTALIZER)
current setting appears here
LB KLB MMLB TONS