Panametrics GF868, Руководство по программированию, Страница: 43 / 167

12/1/99
1-36 Programming Site Data
The SYSTM Sub-Menu
(cont.)
IMPORTANT:
After setting up the Stopwatch Totalizer, press [CLR]
to clear the Stopwatch Totalizer, or the new totals
will be added to any previously accumulated totals.
The manner in which the Stopwatch Totalizer responds to an error
condition may be set in the
I/O sub-menu.
Note:
The above option bar shows English units, as an example.
The abbreviations and definitions of all the available volumetric and
totalizer units are shown in Table 1-5 below. The choices shown on
the option bar are determined by the selection made at the
SYSTEM
UNITS prompt screen at the beginning of this sub-menu.
Global SYSTM
É
Press [F1]-[F4] to select the
desired volumetric units for the
flow rate display. Press [
→]
to
access the additional choices of
[F1] = KSCF
and
[F2] = MMSCF.
STOPWATCH TOTALIZER
current setting appears here
VOLUMETRIC UNITS
current setting appears here
ACF KACF MMACF SCF
Table 1-5: Available Volumetric/Totalizer Units
English Metric
Actual Units
ACF = Actual Cubic Feet ACM = Actual Cubic Meters
KACF = Thousands of ACF KACM = Thousands of ACM
MMACF = Millions of ACF MMACM = Millions of ACM
Standard Units
SCF = Standard Cubic Feet SCM = Standard Cubic Meters
KSCF = Thousands of SCF KSCM = Thousands of SCM
MMSCF = Millions of SCF MMSCM = Millions of SCM
Global SYSTM Press
[F1]-[F4]
to select the
desired time units for the
volumetric flow rate display.
VOLUMETRIC UNITS
current setting appears here
VOLUMETRIC TIME
current setting appears here
/SEC /MIN /HR /DAY