Panametrics DigitalFlow XGF868i, Руководство для стартапов

Страница: 57 / 90

DigitalFlow™ XGF868i Startup Guide 47
Chapter 4. Operation
4.5.3 PanaView Display
Power up PanaView, establish communications with the XGF868i and enter the required startup parameters , as
described in Chapter 2, Initial Setup . Then, proceed as follows:
Note: See Chapter 2, Initial Setup , in this manual and/or Chapter 1, Programming Site Data , in the Programming
Manual for complete instructions on entering startup data via PanaView.
1. In PanaView, pull down the Output menu, as shown in Figure 14 below, and click on the Text Display option.
Figure 14: The Output Menu
Note: The Text Display window that appears after Step 1 is actually stacked on top of any previously opened
windows (such as the Meter Browser window).
2. Using the Window menu, as described in the PanaView User’s Manual, arrange the open windows in the desired
format. For this discussion, Figure 15 below shows the Text Display window in its maximized (full-screen) size.
Figure 15: The Text Display Window
3. The left pane of the Text Display window contains the standard PanaView network tree. Expand the XGM branch,
and double-click on the desired channel. (On 2-channel units, you can also display the SUM, DIFF or AVG
parameters.)