Panametrics DigitalFlow GS868, Руководство по программированию, Страница: 60 / 146

Chapter 3. Logging Data
50 DigitalFlow™ GS868 Programming Manual (2-Channel)
3.2 Creating a Standard Log
Use the STD submenu to create a new standard log and to select the parameters to log, the log start time and date,
the log end time and date, and the time increment. Also, any log file already stored in memory may be inspected
and/or changed.
Press the appropriate side of the
[SCREEN] key to activate the desired pane of the display screen, and complete the
following steps:
1. To access the Log Menu, press the [LOG] key.
a.
If you have activated the security feature (see Chapter 1,
Programming Site Data, page 33 for details), enter the
assigned password and press
[ENT]
.
2. Press [F1] = STD .
3. Use the

]
,
 
] and [F1]-[F4] keys to inspect a completed log or to change an active log, or enter a new name
(up to 5 characters) and press [ENT] to create a new log file.
Note:
At the
NAME
prompt, the option bar will show the names of all completed or active log files that are currently
stored in memory. Recall that a flashing asterisk (*) appears at the far right of the locator bar if the Model
GS868 is currently logging data (see Chapter 3, Operation, of the Startup Guide).
4. At the
Log Message prompt, enter a brief description (up to 21 characters) of the log. Press
[ENT] .
5. Use the

] ,


] and [F1]-[F4] keys to select the first parameter to be logged. See Table 20 below for a list of the
available options.
IMPORTANT: Only the first parameter logged may be graphically displayed in the LOG Submenu of the Display Menu.
Keep this in mind when selecting a parameter. See Chapter 2, Displaying Data, for instructions.
Refer to Chapter 3,
Diagnostics, of the Service Manual for a discussion of the many parameters accessible via the
DIAG option.
Note: The units assigned to the parameters in Table 20 on page 50 are those selected in the User Program ( SYSTM
submenu).
6. Use the

]
,
 
] and [F1]-[F4] keys to select the second parameter to be logged.
Table 20: Measurement Parameter Options
Option Bar Choice Description
[F1] = VEL Flow Velocity
[F2] = VOLUM Volumetric Flow
[F3] = +TOTL Forward Totalized Volume Flow
[F4] = -TOTL Reverse Totalized Volume Flow
[
?
+ [F1] = MDOT
Mass Flow
[
?
+ [F2] = +MASS
Forward Totalized Mass Flow
[
?
+ [F3] = -MASS
Reverse Totalized Mass Flow
[
?
+ [F4] = DIAG
Diagnostic