Panametrics DigitalFlow GS868, Руководство по программированию, Страница: 34 / 146

Chapter 1. Programming Site Data
24 DigitalFlow™ GS868 Programming Manual (2-Channel)
1.8.2.1 Entering Volumetric Data
5. Use the [F1]-[F4] and
 
] keys to select the desired
Volumetric Units for the flow rate display.
The abbreviations and definitions of all the available volumetric and totalizer units are shown in Table 7 below. The
choices shown on the option bar are determined by the selection made at the previous SYSTEM UNITS screen.
6. Use the [F1]-[F4] keys to select the
Volumetric Time (units for the volumetric flow rate display).
7. Use the [F1]-[F4] keys to select the Vol Decimal Digits (the desired number of digits to the right of the decimal
point) in the volumetric flow rate display.
1.8.2.2 Entering Totalizer Data
8. Use the [F1]-[F4] and


] keys to select the
Totalizer Units.
The abbreviations and definitions of all the available volumetric and totalizer units are shown in Table 7 above. The
choices shown on the option bar are determined by the selection made at the previous SYSTEM UNITS prompt
screen.
9. Use the [F1]-[F4] keys to select the
Total Decimal Digits (the desired number of digits to the right of the decimal
point) in the totalized flow display.
Table 7: Available Volumetric/Totalizer Units
English Metric
Actual Units
ACF = Actual Cubic Feet ACM = Actual Cubic Meters
KACF = Thousands of ACF KACM = Thousands of ACM
MMACF = Millions of ACF MMACM = Millions of ACM
Standard Units
SCF = Standard Cubic Feet SCM = Standard Cubic Meters
KSCF = Thousands of SCF KSCM = Thousands of SCM
MMSCF = Millions of SCF MMSCM = Millions of SCM