Using the unit
iPod, iPhone or iPad Dock Accessory
This unit is designed to allow you to connect an iPod, iPhone or iPad without the need for dock connectors. The
design of the unit has been structured to provide support to the connector under normal usage without excessive
pressure on the iPod, iPhone or iPad when controlling playback using the iPod, iPhone or iPad screen.
iPod rear support stand can be adjusted by the ‘Screw-control’ which is located at the back of the rear support stand.
Rotate the ‘Screw-control’ in clock wise, to stretch out the rubber pad.
To reverse the rubber pad backward, simply rotate the ‘Screw-control’ in anti-clock wise.
Installation
Un-installation
1.
2.
3.
1.
2.
3.
4.
4.
Insert the dock accessory connector
to the main unit input socket properly
Unplug the dock accessory connector
from the main unit input socket
