Using the unit
Alarm Function
This unit has a alarm function to enable you to program the unit to automatically switch on at preset times, it will
automatically turn off after an hour. It is equipped with 4 alarm modes: iPod, iPhone, iPad, Radio, USB or SD.
there are
6 modes not 4?
Before setting the alarm, make sure to set the clock.
How to Set the Alarm
Press
Function / Result
On Standby mode press
and hold the ‘Alarm’ button
14
on the remote control.
The ‘ALARM’ symbol appears in the display and the ‘HOUR’ will flash.
The ‘Back’
20
or the ‘Next’
22
button on the remote
control. Or the ‘Back’
5
or the ‘Next’
6
button on
the unit.
To adjust the hour of the desired ‘ON’ time, then press the ‘ALARM’
14
button on the
remote control to confirm. The ‘MINUTE’ will now flash.
The ‘Back’
20
or the ‘Next’
22
button on the remote
control. Or the ‘Back’
5
or the ‘Next’
6
button on
the unit.
To adjust the minutes of the desired ‘On’ time, then press the ‘ALARM’
14
button on
the remote control to confirm. The ‘
WAKE UP SOURCE’
will now flash.
Doe it say ‘WAKE UP SOURCE’ OR ‘ALARM MODE’ - IT IS INCONSISTANT?
The ‘Back’
20
or the ‘Next’
22
button on the remote
control. Or the ‘Back’
5
or the ‘Next’
6
button on
the unit.
To select the wake up source – iPod, iPhone, iPad, Radio, USB or SD, then press the
‘ALARM’
14
button on the remote control to confirm.
Alarm Mode Setting
The radio will come on at your selected wake up time, however, if the ‘ALARM MODE’ has been set to wake up to an
iPod, iPhone, iPad, USB or SD you will need to connect the device properly as described on page 12 – 13.
Radio
Tune in the desired radio station you would like to wake up to.
iPod / iPhone / iPad
Connect the iPod, iPhone or iPad as described on page 12 – 13. Select a song or playlist you would like to wake up to
and select ‘PAUSE’.
Wake up volume
The wake up voloume level will automatically rise from 0 – 16 (maximum). If you would like the volume level to be
higher then you will have to manually set it. See page 6.
Snooze Function
Whenever the alarm comes on it can be temporarily suspended for a short period of time (approximately10 minutes),
by pressing the ‘SNOOZE’
11
button on the remote control.The unit will then automatically come on again after
approximately 10 minutes. This procedure can be repeated for approximately an hour.
