17
RF OUTPUT SET
0-9:SELECT(21-69)
OK:CONFIRM SETUP:END
CURRENT
CH 36
RECOMMENDED CH34
If other stations are positioned on near the current RF OUTPUT
CHANNEL, the guide message appears automatically.
The player recommends the optimal RF OUTPUT CHANNEL
number automatically.
6
If the clock has not been set, the clock setting screen will appear.
Please see "Setting time and date" on page 18.
5
Press the [OK] button to confirm the recommended RF output
channel.
7
Should you wish the stations to have the same numbers
as those used on the TV, follow the instructions in "Sorting
programme locations" on page 25.
Else ...
Press the SETUP button to exit the set-up menu and enjoy
your player.
8
PLEASE CHANGE THE TV
CH TO 34.
IMPORTANT!
MANUAL SET
PR01 P-01
PR08 P-08
PR02 P-02
PR09 P-09
PR03 P-03
PR10 P-10
PR04 P-04
PR11 P-11
PR05 P-05
PR12 ----
PR06 P-06
PR13 ----
PR07 P-07
PR14 ----
PR+/-:SELECT
OK:CONFIRM SETUP:END
CLOCK SET
0-9:SETUP (HOUR)
</>:CORRECT SETUP:END
TIME - - : - -
DATE - - / - - /- - - -
If the signal from the player is coming into the TV through the RF
lead, the picture will disappear when you press OK at step 8. You
will need to re-tune your television to the new UHF transmission
channel.
Up [PR+], down [PR-], OK and 'confirm'
Notice the on-screen prompts which the video recorder generates to tell you which button
to press? In general the up and down 'navigation' buttons select or highlight something
and the OK button confirms it.
[PR+] and [PR-] are the same buttons as 'up' and 'down'.
In the DVD section it is usually the left and right buttons which 'select'.
In
s
ta
lla
tio
n
.
.
..
