28
More Functions
Clock / counter display
The counter counts in real time from the point you load the cassette. This does not have to be its
beginning! The counter does not count unrecorded parts of the tape.
If you rewind beyond the zero position, the counter counts in negative values (e.g. -0:01:15).
Each time you press [DISPLAY] button,
1x: Time and date+current status Time and date.
2x: current status counter.
3x: Disappear.
But if you press [CLK/CNT] button, clock and counter on display window
will change each other.
If didn't wind tape (PLAY, FF, REW,...), it doesn't appear the tape remain time.
"E180 00:48" in the picture opposite means an E-180 cassette is loaded and remaining play or record time is 48
minutes.
STOP SP PR01 ARD
14:00 13/07 E180 00:48
STEREO ON
Accessing counter zero position
The player will wind to the position 0:00:00 and stop.
Remaining time and cassette length
When you want the player to show the time remaining from the current player tape position (to find out if
there is sufficient space for a recording, for example).
To ensure the remaining time shown is accurate, select the length of cassette currently loaded by selecting
this function until you reach the correct length.
Remaining time display is
only possible when the
cassette is loaded.
TAPE CONTROL
TAPE REMAIN
E-240 01:27
TAPE REMAIN
GO TO ZERO
COUNTER RESET
INDEX+
INDEX-
E-180
E-240
E-300
PR+/-:SELECT
OK:CONFIRM SETUP:END
PR+/-:SELECT
OK:CONFIRM SETUP:END
REW SP
GO TO ZERO
0:02:13
Resetting the counter to zero
Reset the counter.
COUNTER RESET
0:00:00
.
.
.
