6
Operation instructions
Operates by selecting automatically the operation mode ( HEAT, DRY, FAN , COOL ) depending on the
room temperature during starting.
With the remote controller pointing towards the air conditioner.
Press button, when the appliance receives the
signal, the RUN indicator of the indoor unit lights up.
When the unit is not at FEEL mode.
Press the MODE select button.
Move the MODE to the FEEL position.
Indoor temperature
Operation mode
Target temperature
Less than 20
0
C
HEATING (FOR HEAT PUMP TYPE)
FAN (FOR COOL ONLY TYPE)
23
0
C
20C~26
0
C
DRY
18
0
C
Over 26
0
C
COOLING
23
0
C
Air temperature adjustment is possible even during FEEL operation.
There are 6 levels of adjustment possible with the button or
the button.
There will be a delay when changing mode
is made during the operation.
As there might not be air blown out.
If you don't like the content of FEEL mode operation,
change to HEATING, DRY or COOLING than FEEL.
Press the button or the button.
When the button is pushed, the temperature will increase 1
0
C.
After temperature will increase 2
0
C, the indicator will not change
When the button is pushed, the temperature will reduce 1
0
C.
After temperature reduce 2
0
C, indicator will not change.
Operation mode and temperature are determined by indoor temperature
Setting temperature
Selecting FEEL mode
2
Turning on
1
3
NOTE
SLEEP
FAN
TIMER
SWING
ON/OFF
MODE
MID
SWING
AUTO
DRY
FAN
HEAT
COOL
FEEL
SLEEP TIMER ON
HIGH
LOW
TIMER OFF
2
3
1
FEEL mode operation procedure
ON/OFF
The operation of the AUTO
mode can be performed by
only pressing the ON/OFF
button from the next time.