4
Remote controller
Remote controller
transmitting display
time setting display
temperature setting display
The remote controller transmits signals to the system.
ON/OFF butto
n
Used to start and stop operation
when pressed.
TIMER button
Used to select TIMER operation.
UP button (TOO COOL button)
Used to increase the set room temperature.
and time.
DOWN button (TOO WARM button)
Used to decrease the set room temperature
and time.
SLEEP button
Used to set or cancel sleep mode operation.
SWING control button
Used to adjust airflow direction.
FAN SPEED control button
Used to select the indoor fan motor speed
Auto, High, Mid and Low.
MODE button
Used to select the type of operation mode: Feel,
Cooling, Dry, Fan and Heating (Only for Heat Pump).
Feel mode can select the operation mode such as
COOL, DRY, FAN, HEAT automatically depending
on the room temperature, and the feel mode is
default setting at starting.
some remote controller's display is like he above
Note
: The above remote controller is only for reference, please subject to the substantiality.
When the batteries are inserted into the remote controller, all the signals will display on the screen and keep
2 seconds, then the COOLING and HEATING signals will flash respectively. For cooling only air con, please
press any button when the cooling signal is flashing, then the remote controller has been set as cooling only.
For cooling and heating air con, please press any button when the heating signal is flashing, then the remote
controller has been set as cooling and heating. If none of the button is pressed within 10 seconds, the remote
controller will be set as cooling and heating automatically. Cooling only air con can use the remote controller
which has cooling and heating function, but do not have the function of heating.
Although the air con is not running, remote controller still have some display (Only for Cooling and Heat model).
Note: Each model and relevant functions will be further specified in following pages
SLEEP
FAN
TIMER
SWING
ON/OFF
MODE
MID
SWING
AUTO
DRY
FAN
HEAT
COOL
FEEL
SLEEP
TIMER ON
HIGH
LOW
TIMER OFF
Signal Transmitting Window
Transmits signals to the system
Setting Display
setting temperature
adjustment display
(During feel mode)