PaloAlto Networks PA-400 Series, Справочник по аппаратуре

Страница: 18 / 60

18
PA-400 SERIES NEXT-GEN FIREWALL HARDWARE REFERENCE | PA-400 Series Firewall Overview
©
2021 Palo Alto Networks, Inc.
Item Component Description
to learn how to connect from a
Mac or Linux computer.
4 CONSOLE port
(RJ-45) Use this port to connect a
management computer to the
firewall using a 9-pin serial
to RJ-45 cable and terminal
emulation software.
The console connection provides
access to firewall boot messages,
the Maintenance Recovery Tool
(MRT), and the command line
interface (CLI).
If your
management
computer does
not have a serial
port, use a
USB-to-serial
converter.
Use the following settings
to configure your terminal
emulation software to connect to
the console port:
• Data rate: 9600
• Data bits: 8
• Parity: none
• Stop bits: 1
• Flow control: None
5 USB port Use this port to bootstrap the
firewall.
Bootstrapping enables you to
provision the firewall with a
specific PAN-OS configuration
and then license it and make it
operational on your network.
6 LED status indicators Six LEDs that indicate the
status of the firewall hardware
components (see Interpret
the LEDs on a PA-400 Series
Firewall ).
The following image shows the front panel of the PA-410 and the table describes each front panel
component.