Palmgren TU 2506, Руководство по эксплуатации

Страница: 17 / 98

Page 17
TU2506
ǀ
TU2807V US
2.6 Emissions
The level of noise emitted by the lathe is less than 78 dB(A).
INFORMATION
This numeric value had been measured on a new machine under conventional operating condi-
tions. Depending on the age or wear of the machine, the noise behavior of the machine might
change.
Furthermore, the extent of the noise emission is also depending on manufacturing
influence factors, such as speed, material and clamping conditions.
INFORMATION
The mentioned numerical value is an emission level and not necessarily a safe
working level.
Unless the degree of noise emission and the degree of noise disturbance are depending on
one another it is not possible to use it in order to reliably determine if it is necessary to take fur-
ther preventive measures or not.
Tailstock - sleeve diameter 30mm (1.181")
Tailstock sleeve travel 65mm (2.56") 85mm (3.35")
Tailstock cross adjustment + - 10 mm (0.39")
Tailstock feed Lead Screw size 9/16" Dia - 10 TPI
Tailstock feed Dial graduation 0.001" (1rev = 0.1")
2.3 Work area
TU2506 TU2807V
Height 2000mm (78.7") 2000mm (78.74")
Length 2200mm (86.6") 2200mm (86.61")
Depth 1900mm (74.8") 1900mm (74.8")
2.4 Environmental conditions
TU2506 TU2807V
Temperature 40 - 95 °F
Humidity 25 - 80 %
2.5 Operating material
TU2506 TU2807V
Feed gear Mobilgear 627 or equivalent oil
see also

"Lubricant“ on page 91
Bright steel parts and lubricating nipples Non-corrosive lubricating oil
Change gears Chain oil (spray)
2.2 Machine specifications
TU2506 TU2807V