background image

Changing the Applications Launcher display

45

To display applications by category: 

1.

Tap the Home icon 

2.

Do one of the following:

– Tap the Home icon 

 repeatedly to cycle through all your categories.

– Tap the pick list in the upper-right corner of the screen, and select the 

category you want to display.

– When the highlight in the Applications Launcher is not active, press and 

hold Select on the navigator to open the category list, press Up or Down on 
the navigator to highlight a category, and then press Select on the navigator 
to view that category.

Changing the Applications Launcher display

By default, the Applications Launcher displays each application as an icon. As an 
alternative, you can choose to show a list of applications. You can also choose to 
view the same category of applications each time you open the Applications 
Launcher.

To change the Applications Launcher display:

1.

Tap the Home icon 

.

2.

Tap the Menu icon 

3.

Select Options, and then select Preferences.

4.

Tap the View By pick list and select List.

5.

Tap OK.

To open the Applications Launcher to the last opened category:

1.

Tap the Home icon 

.

2.

Tap the Menu icon 

3.

Select Options, and then select Preferences.

4.

Tap the Remember Last Category check box to select it.

5.

Tap OK.

Содержание Tungsten Tungsten T Handhelds



































































































































































































































































































Отзывы: