Palm Tungsten T2, Руководство пользователя

Страница: 40 / 502

Chapter 3 Entering Data on Your Handheld
26
5.
Do one of the following:
– If you are drawing a single stroke character, lift the stylus from the screen at
the end of the stroke shape. When you lift the stylus from the screen, your
handheld recognizes your stroke and prints the letter at the insertion point
on the screen.
– If you are drawing a multi-stroke character, draw the remaining strokes
required for the character. The order of the strokes required is shown in the
tables. When you lift the stylus from the screen after drawing the last stroke,
your handheld prints the letter at the insertion point on the screen.
To delete Graffiti 2 characters:
■
Set the insertion point to the right of the character you want to delete and make
the backspace stroke in the Graffiti 2 writing area.
Graffiti 2 tips
When using Graffiti 2 writing, keep these tips in mind:
■
Accuracy improves when you write large characters. Draw strokes that nearly
fill the Graffiti 2 writing area.
■
Write at natural speed. Writing too slowly can generate recognition errors.
■
Press firmly and do not write on a slant. Vertical strokes should be parallel to
the sides of the Graffiti 2 writing area.
■
Alternate stroke shapes are available for some characters. You can use the
Graffiti 2 Preferences screen to choose the one that’s easiest for you.
See
“Graffiti 2 Preferences” in Chapter 22 .
Backspace