Pallipartners 970P, Руководство пользователя

Страница: 14 / 20

12
Field detection is more complicated, the composition of the
regional soil, the component, size, shape and the oxidation degree
of the underground metals will all affect the detection results. This
chapter is only the general steps of the field detection. You should
operate again and again, accumulate experience to achieve good
results.
1. Turn On
Hold the detector, keep the search coil be away from the ground.
Press the Power button, the detector will sound two moo tones,
and all the LCD patterns are lighted for a while. And the detector
is restored to the setting of last time.
2. Set the operation mode
In general, the user could choose the ALL METAL mode. At this
time, the detector will respond to all kinds of metals.
3. Choose the sensitivity
The user always expects to set the sensitivity higher. However,
in the higher sensitivity range, the detector will be more sensitive
to the electromagnetic interference that comes from the power
lines or cables around, and it will react abnormally to the
mineralization soil or electrical conductivity soil. If you move the
search coil in the detection area, and the detector sends an
unstable false signal, please decrease the sensitivity.
If you operate the detector with your partner at the same time,
please pay attention to keep more than 10 meters away from
each other, and decrease the sensitivity appropriately.
4. Move the search coil
When detecting, move the search coil at a constant speed, not