Pallipartners 970P, Руководство пользователя

Страница: 13 / 20

11
The identify cursor and digital cursor are extinguished, the depth
cursor is full, and the detector sounds a slight single frequency
tone.(See Fig.15)
b) Take a 25
￠
silver coin and let it approach the search coil slowly.
At the position of about 7” to 8”, the first set of signal strength
cursor begins to appear, the sound becomes louder and the
tone becomes higher. Continue to move the 25
￠
silver coin,
the signal strength cursor is fast full, the sound is louder, and
then the depth cursor indicates the depth down until only one is
left, indicating that the metal is gradually approaching the center
of the search coil.(See Fig.16)
c) Press the "P-P" button lightly again, the PP cursor will be
removed, and exit the PP mode.
Done this step, you has a basic knowledge to the detector, and
you can move to next step of basic operation.
BASIC OPERATION
The detector is used for outdoors. There are too many objects
indoors, and all kinds of electrical equipment that will bring
interference signals. So it is not fit for using the detector indoors.