Palfinger PK9001-EH, Руководство оператора

Страница: 59 / 184

Chapter 5 Crane control systems
53
Stability control (ISC - S)
If the crane is delivered with CE conformity, it is standard equipped with stability control (ISC - S).
The incorporation of the support situation in the load moment limiter is realized using this system at
PALFINGER. This means that the crane may even be operated when the support outrigger beams are
not fully extended.
After the supporting procedure, the stability control system records the support situation. The load
limits are adapted to the current support situation and saved when switching from support to crane
operation.
Danger!
If the support situation is changed (also with stability
control) and the outer boom is not in the transport position, the
vehicle can tip over!
Changing the support situation is only permitted if the outer boom is in the transport position!
Note!
The installer has to adjust the stability control system. For
this reason, the installer must produce an appropriate load capacity
label and include it with the operating instructions.
Note!
In order to be able to lift loads, all available stabilizer cylinders
must be in the support position (firmly on the ground).
The maximum permissible load moment can only be reached with all available outrigger beams fully
extended.