Palfinger PK9001-EH, Руководство оператора

Страница: 101 / 184

Chapter 6 Ancillary equipment
95
9. Clamping screw for tilting the remote holder
Tilting the remote holder:
x
Loosen the clamping screw (a) slightly.
x Lift the remote holder (b) above the safety pin.
x
Turn the remote holder to the desired position
and snap it in the safety pin.
x
Fix the remote holder using the clamping screw
(a).
Information!
While the crane is being operated or transported the
remote holder must be firmly secured!
10. Fall protection device in stabilizer area
Can be moved inwards in case of tiltable stabilizer cylinders.
11. Foot board
Can be moved upwards in case of tiltable stabilizer cylinders.
Fly jib
Refer to operating instructions of the fly jib.
Workman basket
Refer to operating instructions of the workman basket.
Note!
In order to prevent the pto from stopping, it is absolutely necessary
that the automatic engine speed increase function is active or the
engine is run at increased speed.
Note!
The controls work wirelessly even when the remote control console is
connected to the workman basket.