Palfinger PK9001-EH, Руководство оператора, Страница: 105 / 184

Chapter 7 Preparing for crane operation
99
Use for intended purpose / limits of the device
Danger!
Improper use endangers people and causes damages to the crane and
loss of warranty and liability.
Use the crane only within the load limits shown on the load capacity chart to lift, move, carry and set
down loads.
It is allowed to:
x Load/unload your own vehicle or another vehicle;
x
Lift and move loads up to or down from large heights;
x Lift and move loads below ground level;
x
Lift loads up to a specific height and hold them in this height for assembly works (e.g. rafters, steel
girders, etc.)
x
Occasional grab application for lifting and moving bulk materials such as loose sand, gravel etc.
For the crane's classification refer to chapter 13, 'Technical Description'. Improper use is prohibited.
If the operating instructions of any ancillary equipment or instructions prepared by the operating
company allow other use (for instance excavating or diagonal pull), which contradict these operating
instructions, then the crane's operating instructions shall have priority.
It is not allowed:
x
To use the device for other purposes than the ones specified above;
x To use the device for logging and scrap application;
x
To push against obstacles or loads;
x To pull, to pull things loose, any diagonal pull;
x
Abrupt release of boom system load;
x To attach loads to other positions on the crane than the intended ones;
x Any excavating work with the grab (refer to 'Grab', chapter 6 'Ancillary equipment').
x
To transport persons.
Exception: Transporting persons in the PALFINGER workman basket, only on specially equipped
cranes. National laws, regulations and standards must be complied with.
Note!
Matching workman baskets are available from all PALFINGER
partners.