Palazzetti WILMA, Использование и функциональность

Страница: 22 / 68

2.3.3
6HWWLQJWKHGLVSOD\EULJKWQHV
Display brightness when in standby mode can be set.
a) Use the arrow buttons to go to the setup menu and then press ;
b) Use the button to select the password “7” and then press to con ¿ rm;
c) Use the button to scroll to and select submenu
[11]
and press to con ¿ rm;
d) Set the desired brightness ( OFF, 1 ... 5 ) using the buttons and press to con ¿ rm.
2.3.4 Setting the volume
The volume of the buzzer can be set based on requirements:
a) Use the arrow buttons to go to the setup menu and then press ;
b) Use the button to select the password “7” and then press to con ¿ rm;
c) Use the button to scroll to and select submenu [
13
] and press to con ¿ rm;
d) Set the desired volume (OFF, 1 to 5) using the buttons and press to con ¿ rm.
2.3.5
,PSURYLQJWKHFRPEXVWLRQ
A good combustion depends on several factors (type of installation, operation and maintenance conditions, type
of pellet etc ..)
If at the end of combustion in the brazier are many waste, it is advisable to change the combustion con
¿ gurations
(increasing the value) to ¿ nd the most satisfactory solution.
a) Use the arrow buttons to go to the setup menu and then press ;
b) Use the button to select the password “7” and then press to con ¿ rm;
c) Use the button to scroll to and select submenu [14] and press to con ¿ rm;
d) Set one of the following values using the and buttons:
“1”
“2”
“3”
e) Press to con ¿ rm the settings.
22