Palazzetti WILMA, Использование и функциональность

Страница: 19 / 68

ENGLISH
1.1.2 Description of the menus
ICON FUNCTION DESCRIPTION
VALUES
Power Stove output setting 1..5
Fan
Setting of the air fan speed. 1..5; Auto; Hi
Temperature
Displays the
probe*
temperature reading and is used to set the desired
temperature.
*con
¿ g.1:
water
probe; con ¿ g.2: room probe; con ¿ g. 3-4: external/tank probe.
con ¿ g.1: 55.. ƒ C
con ¿ g.2: 1 .. 4 ƒ C
con ¿ g.3-4: 5 ..75 ƒ C
Fuel
Not used
Timer
Enables or disables the timer. When enabled, the icon will be displayed steady
(not À ashing)
ON - OFF
ICON FUNCTION SUBMENU DESCRIPTION
VALUES
Setup
[1]
Weekly timer
Assigns the programs (max 3) to the different days of the week
[d1] ... [d7]
[2] Programs Program setting menu
[P1] ... [P6]
[3] Time / date Time and date setting
[4] Hours remaining
Displays the number of hours remaining until recommended
maintenance. When “Hi” is displayed, the remaining time exceeds
999 hours.
[5] System information Displays the current software version
[6]
Water temperature
It allows to set the desired temperature for the water supply
(only in con
¿ guration 2-5).
6 ...
ƒ C
[7] Eco function
Enables or disables Eco Mode, in which the stove automatically
switches off and on based on room temperature (only in
con
¿ guration 2-5).
OFF; Eco
[8] Restart delta
Is the number of degrees centigrade below the switch-off
temperature at which the stove switches on again automatically
(except in con
¿ guration 1).
,5 ... 5,
ƒ C
... 4
ƒ C
[9] Frost protection temperature
Minimum temperature below which the stove switches on
(except in con
¿ guration 1).
OFF; 3 ... 2
ƒ C
OFF; 3 ... 5
ƒ C
[10] Lock keypad Disables the buttons on the keypad
OFF; Lo; Hi
[11] Display brightness Sets display brightness OFF; 1 ... 5
[12] Display mode Sets how the data is displayed OFF; 1 ... 4
[13] Buzzer volume Sets the buzzer volume OFF; 1 ... 5
[14] Combustion Three different types of combustion can be set 1 ... 3
[30]
Installer menu Sets/displays the stove configuration
PWD: “54”
[31]
Manual auger load Manual activation of the pellet load system
PWD: “54”
[33]
Pump power
Menu relating to the service centre
PWD: “54”
[34]
Enable/Disable
Menu di competenza del centro di assistenza
PWD: “54”
[40] pump modulation Menu relating to the service centre
Submenus [30] and [40] in the Setup menu are password-protected and reserved for service centre personnel.
19