52
004778190 - 15/01/2020 - PN - Italy
1
Panneau de commande
1.1 Description
Le panneau de commande est composé de :
A) une partie supérieure avec les LED
d’état et les icônes rétroéclairées qui
identifient chaque fonction ;
B) affichage à LED ;
C) touche d’allumage ;
D) touche « Annuler » et affichage « erreur »;
E) deux touches fléchées pour se déplacer
parmi les différentes fonctions ;
F) deux touches et pour accéder aux
sous-menus et modifier les paramètres
de fonctionnement ;
G) une touche d’envoi pour confirmer
le paramètre ou la sélection.
1.1.1 LED d’état
ICÔNE
AVERTISSEMENT
DESCRIPTION
Granulés de bois en
épuisement
Indique, si prévu, qu’il est nécessaire de recharger le réservoir de granulés
Entretien
Indique la nécessité d’effectuer un entretien
Assistance
Indique la présence d’une erreur
Récepteur de la
télécommande
Indique la présence de connexion sans fil de la télécommande optionnelle
Minuterie active
Indique si la fonction minuterie est active
LED de signalisation état
(près de la touche
)
LED toujours allumée : poêle allumé et en fonctionnement
LED intermittente : poêle en phase d’allumage ou en mode veille
LED éteinte : poêle éteint
1.1.2 Description des menus
ICÔNE
FONCTION
DESCRIPTION
VALEURS
Puissance
Configuration de la puissance de fonctionnement
1..5
Minuterie
(timer)
Valide ou exclut la minuterie. Quand cette fonction est validée, l’icône
s’affiche de façon fixe
ON - OFF
Toutes les touches sont de type
capacitif, elles n’ont donc pas besoin
d’être appuyées pour être activées,
mais il suffit d’effleurer la surface.
C
D
A
B
E
F
G