6
GHI
Type infrared ceramic heaters
User’s Manual
CAUTION
!
DANGER
!
ATTENTION
!
THE USIGE OF
MOVING EQUIPMENT
IS COMPULSORY
ATTENTION
!
FORBIDDEN!
ATTENTION
!
ONLY
QUALIFIED
PERSON
The appliances will be delivered in card board box as follows:
• gas ramp with gas magnetic valve and ignition control
• with Declaration of Conformity
• as well as this instruction manual and a declaration of conformity
The unpacking process of the appliance:
• unload the burner and the accessories from the card board box (assembly in the 5. chapter)
• do not remove the protection cap from the burners gas connection or from the gas joining set (optional) until You do
not connect it to the pipe line.
•
Check the unit and its accessories for any damages which could be arise during the transportation.
•
if there are any damages found, report them immediately to the manufacturer or Your closest dealer.
There is an envelope inside the unit containing the Instructions for Installation and Servicing, User’s Manual and Guarantee and
services and the warranty documents.
4.
Operation principle
The appliance operates on the basic of radiant heating. Actually this is an atmospheric burner, where the gas and air mixture flow through
the ceramic plate and the flame come into being in the holes of ceramic. The temperature of the surface of the ceramics is 850-900°C.
This surface has a high radiant intensity and quick heat passing.
The construction of the equipment is not insure to lead away the being combustion product, so in this case necessary to build this type
appliances in a well ventilated halls. (necessary air ventilating see on the 5. chapter)
The equipment takes the air from the hall for the burning process.
The variety-list of appliances to be found in the
enclosure 1
.
The heating and consumption values to be found in the
enclosure 2.
as per appliance and gas types.
•
The delivery must be made according to the following:
→
The package must be carefully secured in the loading space.
→ The package must be transferred in a closed space (always keep packing parts away environmental impacts).
•
The unit has a special safety packing for transport and delivery which must be kept in good conditions till the unit is positioned
on the installation place.
• Make sure that the unit has all its parts, as specified in the order.
•
Check if there are any damages and if the unit abbreviation is the same as the one of the ordered model.
• Every unit is factory tested before shipment, therefore, if there are damages, report them immediately to the carrier.
Transporting, unloading and moving is a process which must be made carefully to avoid any kind of damages. Try not to use the unit’s
components as handholds. When lifting, bear in mind that the centre of gravity of the unit may be off-centre.
3.
Transportation, unpacking, handling
