W6x User Manual
28
VLAN Id for Management:
To turn on VLAN Management, select the
VLAN Id
button.
Note:
802.1q tagging must be enabled.
In the
VLAN Id
text box, type the ID number of the VLAN you want to allow access to the administrative
functions of the W6x.
Note: The IP address range for the VLAN must be the same as the W6x.
Click
Accept
to save your changes.
Wireless MAC Filter
Under the W6x main menu, in the Wireless
section, click
MAC Filter
. The Wireless MAC Filter
page appears for you to allow or block access to the network by clients with specific MAC addresses.
ACL Mode:
To block a client from associating with the W6x, select
Disabled
from the drop-down
list. Or to deny or allow access by clients with a MAC that you type in a list, select
Allow MAC in
the List
or
Deny MAC in the List
in the drop-down list.
o
If you select
Allow MAC in the List
, only clients whose MAC addresses are on the list in
the table will be able to access the network, and other clients will be blocked.
o
If you select
Deny MAC in the List
, clients whose MAC addresses are on the list will be
unable to access the network, but all other clients will be granted access.
MAC Address:
In the text box, type a client’s MAC address, then click
Add
to add the client to
the list.
