pakedge
device&software inc. /
SW24-GBP
6
pakedge
device&software
inc.
| 1163 Triton Drive | Foster City | California | 94404 | USA | 650.385.8700
Page
6
of
73
1.
Introduction
1.1.
Package Contents
Open the package carefully, and make sure that none of the items listed below are missing. Do not
discard the packing materials. In case of return, the unit must be shipped in its original package.
One SW24-GBP
Rack Mount hardware
One Power Cable
One Serial Cable- RJ45 8-pin plug to a 9-hole DB9 plug.
1.2.
General Description
The SW24-GBP Enterprise-Class rack-mountable Gigabit Ethernet switch is designed for maximum
performance and convenience. It incorporates QoS functionality to allow you to prioritize devices on
your network according to your clients needs. All of this is preconfigured for you to minimize
installation time.
All cables install from the rear, for the clean-finished rack appearance that custom installers and
their clients prefer. The SW24-GBP can be configured by Web GUI, serial command-line interface
(CLI), or Telnet. Plug-and-play and auto-negotiation capabilities allow the switch to auto-detect a link
partner with the best available speed.
The SW24-GBP is cased in a heavy-duty 1U housing designed for easy installation and maintenance.
(Rack-mount hardware is included.) The SW24-GBP supports Nway auto-negotiation to automatically
detect network speed (10/100/1000 Mbps) and Full/Half duplex mode. And Auto-MDI/MDI-X port
functionality eliminates the need for crossover cables. Rich diagnostic blue LEDs provide real-time
status monitoring. The SW24-GBP combines two SFP expansion slots to support Mini-GBIC modules.
Series modules can be smoothly connected with Gigabit networking to ensure optimal networking
speed and performance. Finally, the SW24-GBP supports both Command Line and Web Graphical
User Interfaces.
