pakedge
device&software inc. /
SW24-GBP
25
pakedge
device&software
inc.
| 1163 Triton Drive | Foster City | California | 94404 | USA | 650.385.8700
Page
25
of
73
3.1.7.
Quality of Service
In the navigation menu, under Configuration, click Quality of Service. This page is used to set up
the QoS function to help ensure a reliable connection and traffic throughput priorities.
By default
the SW24GBP comes preconfigured with QoS so there should be no need to make any changes
here.
Changing QoS ports:
You can change the prioritzation on the SW24GBP. By default the ports are set as follows:
Ports 1 and 2 are trunk ports (no prioritization)
Ports 3-8 are high priority
Ports 9-12 are normal priority
Ports 13-18 are medium priority
Ports 19-24 are low priority
To change the port priorities you will need to telnet into the switch. To do so open a command
prompt on your computer and enter the following command:
telnet
IP address of switch
