Page | 31
5.
Here you will be able to define the parameters of the schedule. Each of these options is
described next.
Schedule Name
: This is the name of the schedule.
Schedule Options
: You will be able to set the access points to either reboot,
have both the 2.4 GHz and 5 GHz bands active or only have a particular band
active.
Day
: This will allow you to specify which days you want the schedule to be
active. Selecting everyday means the schedule will be active 7 days a week. You
can also select which days you want the schedule to apply to.
Time
: If you check the box “All day” the schedule will apply 24 hours a day. You
can also specify a start and end time for the days you have selected. If you chose
to specify the time please be sure to use a 24 hour clock.
Available AP(s)
: Here you will be able to select which access points you want the
schedule to apply to. If you did not name the access points when going through
the wizard then only the mac address of that access point will be displayed. To
select an access point simply click on it and then click on the arrow that points
to the right hand side. The access point will then be moved over to the Added
AP(s) section.