PAJ
Sensor A/S • Grundtvigs Allé 163 • DK-6400 Sønderborg
Tel: +45 74 43 71 81 • Fax: +45 74 43 71 91 • CVR: 3459-1229 • www.paj.dk • e-mail: [email protected]
APPROVALS: ISO 9001, ISO 14001, ISO 13485, IEC 61340-51 & IPC-A-610 CLASS 3
03-01-0501-CRJ-04 Side 4 af 53
Safety Advice
For your safety
The
WIO200
(WIO) is designed as water in oil monitoring system, with a
relay switch-off function.
Before use please read the user manual and carefully store it in a safe
place. Install and operate the device only after reading and
comprehending the instruction manual, and after you are familiar with the
valid rules on work safety and accident prevention.
Please use the device only as specified. For this purpose please also note
the values in section “Technical data”.
During transport, storage and operation please adhere to the conditions
listed in “Technical data”.
IMPORTANT
Only qualified personnel may assemble start-up and maintain the unit
when it is in a zero voltage state. Only qualified electricians may work on
electrical installations.
The connection and instruction manual contains information that enables
the proper and efficient use of the WIO monitoring system. PAJ Sensors
A/S is not liable for damage caused be improper use of this device. This
manual is an integral part of the basic knowledge necessary for proper use
of the system.
Rights
PAJ Sensors A/S reserves the right to alter its products without prior
notice.
Copying and using the instruction manual for other purposes is only
allowed with the acceptance from PAJ Sensors A/S.
PAJ Sensors A/S accepts no responsibility for possible errors and
deficiencies in brochures, catalogues and other printed material.
PAJ Sensors A/S guarantees correct function as well as fulfillment of the
safety requirements only when connections are made in accordance with
instructions.
