PAJ
Sensor A/S • Grundtvigs Allé 163 • DK-6400 Sønderborg
Tel: +45 74 43 71 81 • Fax: +45 74 43 71 91 • CVR: 3459-1229 • www.paj.dk • e-mail: [email protected]
APPROVALS: ISO 9001, ISO 14001, ISO 13485, IEC 61340-51 & IPC-A-610 CLASS 3
03-01-0501-CRJ-04 Side 36 af 53
FUNCTIONING
Terminal box shall be provided with 24vdc.
Terminal box supply 24vdc on to WIO sensor.
Terminal box measuring mA from the sensor, and convert it to
a
w
or PPM
value.
WIO sensor delivers mA, digital values and relay status to the terminal
box.
H-Alarm LED is for indication of the High Alarm relay state from the WIO
sensor. When the alarm condition is generated by the WIO sensor, then
the High Alarm relay is open and the H-Alarm LED flash red ON/OFF
sequence to show the High Alarm state, and the alarm signal buzzer will
be switched ON.
HH-Alarm LED is for indication of the High High Alarm relay state from the
WIO sensor. When the alarm condition is generated by the WIO sensor,
then the High High Alarm relay is open and the HH-Alarm LED flash red
ON/OFF sequence to show the High High Alarm state, and the alarm signal
buzzer will be switched ON.
The H-Alarm LED or HH-Alarm LED will stay in blinking mode until the H-
Alarm or HH-Alarm button is pressed, then the LED constantly turned on.
The alarm signal buzzer will stay on until the H-Alarm or HH-Alarm button
is pressed.
Miscellaneous
Ambient Temperature, running / storage
0 - 90°C / -30 - +95°C
Relative humidity for running and storage
10% up to 95%, no condensation
Re calibration
Recommended with max 3 years interval
Warranty
2 years
Approvals
Germanischer Loyd
WIO products are EU approval under 75 965 –
09 HH date 2009-11-30
