Pacmac 2015, Руководство оператора, Страница: 9 / 74

2015 OPERATIONS MANUAL
8
THE CHANGE SCREEN FUNCTIONS ARE THE SAME AS THE RUN
SCREEN IN ADDITION TO THE FOLLOWING.
RENAME A PROGRAM
 TOUCHING THE PROGRAM NAME IN THE TOP LEFT-HAND
CORNER OF THE SCREEN ALLOWS THE OPERATOR TO RENAME
THE SELECTED PROGRAM.
SELECT PRINTED OR CLEAR FILM
 PRINTED OR CLEAR FILM IS SELECTED BY TOUCHING THE
APPROPRIATE WORD IN THE CLEAR/PRINTED BUTTON.
 WHEN PRINTED FILM IS SELECTED, THE MACHINE CONTROL IS
NOW SET TO LOOK FOR A REGISTRATION INPUT. THIS INPUT IS
TYPICALLY THE REGISTRATION MARK ON THE FILM.
 THE EYE, WHICH SENSES THE MARK, IS LOCATED DIRECTLY BEHIND
THE NIP AND DRIVE ROLLER ALONG THE FILM PATH.
 BAG LENGTH AND PRINT POSITION WILL BE DISPLAYED ON THE
SCREEN.
 BAG LENGTH IS SET DURING PRINTED SETUP AND PRINT POSITION
ADJUSTS THE PRINT IN RELATIONSHIP TO THE JAW CUT.
 WHEN CLEAR FILM IS SELECTED FILM LENGTH WILL BE DISPLAYED.
 THE OPERATOR CAN CHANGE THE FILM LENGTH BY TOUCHING
THE NUMBER AND THEN TOUCHING THE COUNT UP OR COUNT
DOWN BUTTON TO ENTER THE DESIRED LENGTH.
ENABLE/DISABLE ANY FUNCTION
 THE OPERATOR MUST FIRST SELECT THE FUNCTION BY TOUCHING
THE NUMBER TO THE RIGHT OF THE NAME.
 BY USING THE ENABLE/DISABLE BUTTON, THE OPERATOR CAN
DISABLE THE SELECTED FUNCTION.
 WHEN A FUNCTION IS DISABLED, A RED MARK WILL BE DISPLAYED
NEXT TO THE DISABLE FUNCTION.
 YOU CAN DISABLE ALL FUNCTIONS FROM THE KEYPAD.
CHANGING SETTINGS
 EACH FUNCTION START, AND STOP TIME CAN BE ADJUSTED BY
TOUCHING THE APPROPRIATE NUMBER TO THE RIGHT OF THE
FUNCTION NAME. THIS NUMBER WILL HIGHLIGHT IN RED.