DX-825 End-User Manual
______________________________________________________________________________
15
44
48
If it is set to “Auto”, modem will
automatically assign a channel.
If set to a value 36/40/44/48, modem
will assign this specific channel.
Working Mode
802.11a/n/ac
802.11n/ac
802.11a/n
802.11n
802.11a
WiFi 5GHz mode. Default setting is
“802.11a/n/ac”. WiFi a, n, ac is in the
order of increasing WiFi mode advance.
Select the default setting if you are not
sure what mode is supported by your
device.
Bandwidth(only
11n)
20M
20/40M
20/40/80M
WiFi 5GHz channel bandwidth. Default
setting is “20/40/80M”. Larger value
allows for higher maximum WiFi 5GHz
speed.
20M -> Width of one WiFi channel.
20/40M -> Width of two WiFi channels.
20/40/80M -> Width of four WiFi
channels.
RTS Threshold
Numerical value 1
~ 2347.
This is the packet size threshold which a
“Request-to-Send” (RTS) message will
be sent. Default setting is “2347” (this
value disables RTS altogether).
If you are not sure on RTS application,
leave this to default setting.
Preamble
Length
Short
Preamble
Long
Preamble
Preamble is additional data header
which assists in WiFi data transmission
at the expense of WiFi speed. Default
setting is “Long”.
Set to “Long” may improve WiFi data
transmission in an area with high
interference or low signal strength.
SSID Broadcast
Enable
Disable
This is WiFi SSID Broadcast. Enable
will allow modem’s SSID to be seen by
