RVSG-4014 User’s Manual
51
WPA2-PSK (Wi-Fi Protected Access 2 – Pre-Shared Key)
:
Suitable for home and SOHO environments, it also uses AES
encryption and requires you to enter a password and a re-key
interval time.
Mixed WPA2 / WPA
: During transitional times for upgrades in
the enterprise environment, this mixed authentication method
allows upgraded users and users not yet upgraded to access the
network via the router.
RADIUS (Remote Authentication Dial-In User Service) server
information must be entered for WPA and a as well as a group
re-key interval time. Both TKIP and AES are used.
Mixed WPA2 / WPA-PSK
: useful during transitional times for
upgrades in the home or SOHO environment, a pre-shared key
must be entered along with the group re-key interval time. Both
TKIP and AES are also used.
WEP Encryption
Select to enable or disable WEP (Wired Equivalent Privacy).
Encryption
Strength
Select the encryption strength to be 64 or 128-bit.
Current Network
Key
Select the network key from 1 to 4 from drop-down list.
Network Key 1-4
Enter 4 sets of network key in each field.
RADIUS Server IP
Address
Enter the IP address of RADIUS server.
RADIUS Port
Enter the port number for RADIUS server IP address.
RADIUS Key
Enter the key for RADIUS server. The key you set must be the same
one as configured in the RADIUS server.
WPA Group Rekey
Interval
Enter the re-key interval for WPA.
WPA Encryption
Select WPA encryption to be TKIP, AES or TKIP+AES.
WEP Encryption
Select to enable or disable WEP encryption.
WPA Pre-Shared
Key
Enter the PSK for WPA.
WPA2
Preauthentication
Select to enable or disable WPA2 pre-authentication.
Network Re-auth
Interval
Specify the interval for network re-authentication.
The RVSG-4014 can be configured as Registrar or Enrolee mode.
Registrar
: A registrar is the network enrollment center.
Enrollee
: An enrollee is the device being added to the network.
When RVSG-4014 (AP) is configured as Registrar, you should select Set WPS AP Mode as
Configured (default). When RVSG-4014 (AP) is configured as Enrolee, the Set WPS AP
Mode should be changed to Unconfigured. Please follow the following steps to configure
security setting for your RVSG-4014.
Содержание RVSG-4014
Страница 24: ...RVSG 4014 User s Manual 21 ...
Страница 44: ...RVSG 4014 User s Manual 41 ...
