Packet Force RVSG-4014 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 81

background image

RVSG-4014 User’s Manual

16

Non DMZ Net Mask

Enter the network mask for non DMZ.

Use Static IPv4
Address

Select if assign a static IPv4 address to PPPoE link.

Bridge PPPoE
Frames Between
WAN and Local
Ports

Select if enable bridging PPPoE frames between WAN and local
ports. It allows PC in LAN to set up its own PPP link, or the PC will
access internet via the PPP link in WAN port.

Multicast Proxy

Check to enable IGMP multicast proxy. IGMP (Internet Group
Management Protocol) proxy intercepts the IGMP request from
clients and forwards it to the router after some dealings.

Click

Next

to configure system default gateway. Default gateway interface list can have

multiple WAN interfaces served as system default gateways but only one will be used
according to the priority with the first being the higest and the last one the lowest priority if the
WAN interface is connected. Priority order can be changed by removing all and adding them
back in again.

Click

Next

to select DNS Server Interface from available WAN interfaces or enter static DNS

server IP addresses for the system. In ATM mode, if only a single PVC with IPoA or static
IPoE protocol is configured, Static DNS server IP addresses must be entered.
DNS Server Interfaces can have multiple WAN interfaces served as system DNS servers but
only one will be used according to the priority with the first being the highest and the last one
the lowest priority if the WAN interface is connected. Priority order can be changed by
removing all and adding them back in again.

«
...
17
18
19
20
21
...
»

Содержание RVSG-4014


















































































Отзывы:

Нет отзывов

Похожие инструкции для RVSG-4014

Бренд: Billion Страницы: 35

Anybus Modbus-TCP/RTU Gateway

Бренд: HMS Страницы: 20

Бренд: Raymarine Страницы: 84

Бренд: ProSoft Technology Страницы: 154

ASLINK B2G78-PB1

Бренд: Anywire Страницы: 50

Бренд: Ubee Страницы: 7

Бренд: MAXINCOM Страницы: 55

Бренд: HOOC Страницы: 18

Бренд: Planet Страницы: 8

Бренд: Planet Страницы: 16

Бренд: Planet Страницы: 16

Бренд: Planet Страницы: 131

HomePortal 3700HG

Бренд: 2Wire Страницы: 4

Бренд: 2Wire Страницы: 2

Бренд: Cabletime Страницы: 16

Бренд: Thorsis Technologies Страницы: 68

Бренд: DBL Technology Страницы: 69

Бренд: Viola Systems Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды