PRINTER NOTE: Page size 9” x 9.25”. Align this page to top, right hand corner. Back box bleeds off
top and right edge. Left side of page extends to 9.25 inches.
1.
Choose the SAFTE CHAIN ID selection and press
the <Enter> button.
2.
Use the up and down arrow buttons to choose
between the options: none, master, slave 1, and
slave 2 and press the <Enter> button.
Note: Choose NONE when the cabinet is used in a
stand-alone configuration or the master/slave option is
not desired.
3.
You will be prompted to cycle the power on the DEU
for the changes to take effect.
MENU
ENTER
ESCAPE
NONE
MASTER
SLAVE 1
SLAVE 2
MENU
ENTER
ESCAPE
HEAT THRESHOLD
SAFTE CHAIN ID
CHANGE PASSCODE
UNLOCK OPTIONS
Change Passcode
This option allows the administrator to create or
change a passcode that will protect access to all the
items under the selections SCSI ID Menu, Heat
Threshold, and Change Passcode.
1
Use the arrow buttons to change the code value (0-9)
and the enter button to move from one field to the
next.
2
Press the enter button after you have made your
selections.
3
You will be prompted to press the escape button
after the passcode is changed for the change to take
affect. The default code is “0000.”
Note: The lock will not take effect until you have
returned to the main screen “Status OK.”
