Packard Bell EasyNote NS11HR, Руководство по обслуживанию

Страница: 89 / 162

www.packardbell.com
83
5
Place the new webcam on the top side of the LCD assembly lid.
6
Reconnect the webcam cable to its board connector.
7
Reinstall the LCD front panel by performing steps 6 – 9 of the “Replacing
the LCD front panel” procedure on page 79 .
Make sure the webcam lens is aligned with camera peephole on the LCD
front panel before you secure the panel in place.
8
Reinstall the LCD panel assembly by following the steps 13 – 15 of the
“Replacing the LCD panel assembly” procedure on page 76 .
9
Reinstall the system board by performing steps 19 and 20 of the “Replacing
the system board” procedure on page 67 .
10
Reinstall the keyboard by performing steps 21 – 24 of the “Replacing the
keyboard” procedure on page 53 .
11
Reinstall the palm rest module by performing steps 14 – 17 of the “Replacing
the palm rest module” procedure on page 48 .
12
Reinstall the optical drive by performing steps 10 and 11 of the “Replacing
the optical drive” procedure on page 46 .
13
Reinstall the hard drive by performing steps 8 and 9 of the “Replacing the
hard drive” procedure on page 41 .
14
If you have disconnected any wireless antennas, reconnect them now.
15
Reinstall the bay cover.
16
Reinstall the battery.