MACHINE PREPARATION
1. UNPACKING THE MACHINE
a.
Take off the outer packaging
b. The machine is fastened to the pallet with wooden wedges that block the wheels. Remove tie
down straps
c. Using a ramp, pull the machine off the pallet
2. BATTERY INSTALLATION
a. Remove the squeegee hose from the recovery tank
b. Remove the vacuum cover by rotating it counterclockwise
c. Remove recovery tank by lifting tank by lift chain at the back of the tank and the drain hose at
the front of the tank
d. Place the batteries in the battery compartment
e. Connect the battery connector to the machine connector
f. Replace the recovery tank and reassemble the vacuum cover and squeegee hose
3. BATTERY CHARGE LEVEL INDICATOR
The battery indicator is digital with four display levels and a flashing one. The numbers, which
appear on the display, show the approximate charge level. Four represents a full charge and 0
represents discharged and the batteries must be recharged.
NOTE:
The brush motor automatically switches off after the battery indicator light begins to flash. You will be
able run the vacuum motor and finish drying any wet areas
