Pacific S-20, Инструкция по эксплуатации и каталог запасных частей

Страница: 12 / 57

12
The S-20 pad driver or brush are attached by using the automatic on/off system. This valuable ingenuity removes the need for operators to
kneel or strain to attach the pad driver or brush.
First, start by placing the pad driver or brush on the floor in front of the S-20 scrubber.
Quickly pulse the activation trigger
Position scrub head over pad driver
or brush
MACHINE PREPARATION
ATTACHING YOUR PAD DRIVER OR BRUSH TO THE S-20 - DISK HEAD
Lower the scrub head using the
foot pedal
Turn unit on using key switch
Turn the unit on using the power key switch.
Push or drive it into position so that the unit’s scrub head is centered over the pad driver or brush.
Utilize the foot pedal to lower the scrub deck down onto the pad driver or brush by depressing the pedal while shifting it to the right.
Once clear of the lower notch, lifting your foot will lower the scrub deck. Make sure that the shroud completely covers the pad driver or
brush in the lowered position. Should the shroud be resting on a portion of the pad driver or brush, the head isn’t centered and will not
attach properly.
The operation is completed by quickly pulsing the S-20 activation trigger. This will “click on” the pad driver or brush. If the pad driver or
brush does not quickly engage, do not continue pressing the activation trigger. Realign the scrub deck and try procedure again. When
you have the scrub deck aligned properly, you should see a noticeable drop of the scrub deck when lowered and the bristle skirt on the
shroud should almost be touching the floor.
1
2
3
4
1 2
3
4