TO SCAN A FLUORESCENCE-STAINED GEL
1.
In “
Scan Mode
” lift the lid to open the
scanner.
2.
Slide the black plastic sheet into the groove of the
white backlight to block the white light on the lid*
(
Figure 7
).
3.
Close the scanner lid.
4.
Slide the
Light Selection Switch
on the front side
of the scanner to choose blue light source for
scanning stained gel.
5.
Set and adjust the desired image quality through
the Function Menu if necessary (Please check
“Function Menu Options” section for the details of
all functions).
6.
Press
SCAN
button, green LED will flash and
“CAPTURING”
will be displayed on the screen (If
thermal printer has been connected to the
scanner,
“Printing Yes/No”
option
will be
displayed on the screen.). The scanned image will
be automatically saved to the USB flash drive.
7.
Scanning of the gel sample is now complete.
(*It is suggested to slide the black plastic sheet to block the white backlight on
the lid for fluorescence stained gel scanning.)
Figure 7
Slide the black plastic sheet to block the background light for
fluorescence stained gel scanning.
6
Black plastic sheet
White backlight
