INSTALLATION OF AMBER FILTER SHEET
Glite 965BW is equipped with an amber filter sheet
for blue light protection and gel cutting purposes.
Open the lid and install the filter sheet so the gel
cutting task can be conducted.
1. Open the lid, blue light will automatically turn off.
2. Lift the lid to its maximum opening angle
3. Position the hole of the amber filter sheet in front
of the hanging tab before hanging on the lid
(Figure 8).
4. Place the amber filter sheet onto the filter
hanging tab so the filter sheet hangs as shown in
Figure 9.
5. After hanging the filter on lid, make sure the two
bent areas placed against the lid.
6. Once the installation is completed, one may turn
on the blue LED by pressing “Scan button” for
further extensive experimental procedures.
Figure 8
Figure 9
Filter sheet hanging tab
Amber Filter sheet
