background image

Page 6

SKU 97553

For technical questions, please call 1-800-444-3353.

Use only accessories that are recom-

6. 

mended by Harbor Freight Tools for 

your model.  Accessories that may be 

suitable for one piece of equipment 

may become hazardous when used 

on another piece of equipment.
Do not operate in explosive atmo-

7. 

spheres, such as in the presence of 

flammable liquids, gases, or dust.  

Gasoline-powered engines may ignite 

the dust or fumes.
Stay alert, watch what you are doing 

8. 

and use common sense when operat-

ing a piece of equipment.  Do not use 

a piece of equipment while tired or 

under the influence of drugs, alcohol 

or medication.
Do not overreach.  Keep proper foot-

9. 

ing and balance at all times.  This en-

ables better control of the equipment 

in unexpected situations.
Do not carry the spray handle with 

10. 

your finger on the trigger, whether or 

not engine is operating.
Use this equipment with both hands 

11. 

only.  Using equipment with only 

one hand can easily result in loss of 

control.
Dress properly.  Do not wear loose 

12. 

clothing or jewelry.  Keep hair, cloth-

ing and gloves away from moving 

parts.  Loose clothes, jewelry or long 

hair can be caught in moving parts.
Parts of the Pressure Washer, espe-

13. 

cially exhaust system components, 

get very hot during use.  Stay clear of 

hot parts.
Do not cover the engine or equipment 

14. 

during operation.

Keep the equipment, engine, and sur-

15. 

rounding area clean at all times.
Use the equipment, accessories, etc., 

16. 

in accordance with these instructions 

and in the manner intended for the 

particular type of equipment, taking 

into account the working conditions 

and the work to be performed.  Use 

of the equipment for operations differ-

ent from those intended could result 

in a hazardous situation.
Do  not  operate  the  equipment  with 

17. 

known leaks in the engine’s fuel system.
This product contains or, when used, 

18. 

produces a chemical known to the 

State of California to cause cancer 

and birth defects or other reproduc-

tive harm.  (California Health & Safety 

Code § 25249.5, 

et seq.

WARNING:  The brass components 

19. 

of this product contain lead, a chemi-

cal known to the State of California 

to cause birth defects (or other repro-

ductive harm). (California Health & 

Safety code § 25249.5, 

et seq.

)

When spills of fuel or oil occur, they 

20. 

must be cleaned up immediately.  

Dispose of fluids and cleaning materi

-

als as per any local, state, or federal 

codes and regulations.  Store oil rags 

in a bottom-ventilated, covered, metal 

container.
Keep hands and feet away from 

21. 

moving parts.  Do not reach over or 

across equipment while operating.
Before use, check for misalignment 

22. 

or binding of moving parts, breakage 

of parts, and any other condition that 

may affect the equipment’s operation.  

if damaged, have the equipment 

serviced before use.

  Many ac-

Содержание 97553









































Отзывы: