Page 8
SKU 97553
For technical questions, please call 1-800-444-3353.
turn the engine switch to its
a.
“OFF” position.
allow the engine to completely cool.
b.
then, remove the spark plug
c.
wire(s) from the spark plug(s).
Keep all safety guards in place and in
2.
proper working order. Safety guards
include muffler, air cleaner, mechani
-
cal guards, and heat shields, among
other guards.
do not alter or adjust any part of
3.
the equipment or its engine that is
sealed by the manufacturer or dis-
tributor. Only a qualified service
technician may adjust parts that
may increase or decrease gov-
erned engine speed.
Wear ANSI-approved safety goggles,
4.
heavy-duty work gloves, and dust
mask/respirator during use and ser-
vice.
Keep the high pressure hose con-
5.
nected to the pressure washer and
spray Gun while the system is pres-
surized. Disconnecting the pressure
hose while the unit is pressurized is
dangerous, and may cause injury.
Do not allow the high pressure hose
6.
to come in contact with any hot part
of the unit. The hose might be dam-
aged, possibly causing it to burst or
leak under high pressure.
Maintain labels and nameplates on
7.
the equipment. These carry impor-
tant information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.
If water is leaking out of the Pressure
8.
Washer immediately turn off the unit.
Unplug the Pressure Washer, and
discharge all pressure before tighten-
ing fittings or having repair work done
by a qualified technician.
When the engine is running, do not
9.
allow the Pressure Washer to remain
idle for more than two minutes. If
allowed to remain idle, the water in
the unit will heat up, possibly causing
damage to the Pressure Washer.
Have the equipment serviced by a
10.
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the equip-
ment is maintained. Do not attempt
any service or maintenance proce-
dures not explained in this manual
or any procedures that you are un-
certain about your ability to perform
safely or correctly.
Store equipment out of the reach of
11.
children.
Follow scheduled engine and equip-
12.
ment maintenance.
refueling:
Do not smoke, or allow sparks,
1.
flames, or other sources of ignition
around the equipment, especially
when refuelling.
Do not refill the fuel tank while the
2.
engine is running or hot.
Do not fill fuel tank to the top. Leave
3.
a little room for the fuel to expand as
needed.
Refuel in a well-ventilated area only.
4.
save tHese
instructiOns.
