Pacific hydrostar 65087 Скачать руководство пользователя страница 39

Page 39

SKU 97553

For technical questions, please call 1-800-444-3353.

LiMited 1 Year / 90 daY 

warrantY

Harbor Freight Tools Co. makes ev-

ery effort to assure that its products meet 

high quality and durability standards, and 

warrants to the original purchaser that 

for a period of ninety days from date of 

purchase that the engine/motor, the belts 

(if so equipped), and the blades (if so 

equipped) are free of defects in materials 

and workmanship. Harbor Freight Tools 

also warrants to the original purchaser, 

for a period of one year from date of pur-

chase, that all other parts and components 

of the product are free from defects in ma-

terials and workmanship (90 days if used 

by a professional contractor or if used as 

rental equipment).  This warranty does not 

apply to damage due directly or indirectly, 

to misuse, abuse, negligence or accidents, 

repairs or alterations outside our facilities, 

normal wear and tear, or to lack of main-

tenance. We shall in no event be liable for 

death, injuries to persons or property, or 

for incidental, contingent, special or con-

sequential damages arising from the use 

of our product. Some states do not allow 

the exclusion or limitation of incidental or 

consequential damages, so the above 

limitation of exclusion may not apply to 

you.  THIS WARRANTY IS ExPRESSLY 

IN LIEU OF ALL OTHER WARRANTIES, 

ExPRESS OR IMPLIED, INCLUDING 

THE WARRANTIES OF MERCHANTABIL-

ITY AND FITNESS.

To take advantage of this warranty, 

the product or part must be returned to us 

with transportation charges prepaid. Proof 

of purchase date and an explanation of the 

complaint must accompany the merchan-

dise. If our inspection verifies the defect, 

we will either repair or replace the product 

at our election or we may elect to refund 

the purchase price if we cannot readily 

and quickly provide you with a replace-

ment. We will return repaired products at 

our expense, but if we determine there is 

no defect, or that the defect resulted from 

causes not within the scope of our warran-

ty, then you must bear the cost of returning 

the product.

This warranty gives you specific legal 

rights and you may also have other rights 

which vary from state to state.

3491 Mission Oaks Blvd.  •  PO Box 

6009  •  Camarillo, CA 93011  •  (800) 

444-3353

eMissiOn cOntrOL 

sYsteM warrantY

california and united states emission control 

defects warranty statement

The California Air Resources Board (herein CARB), the United 

States Environmental Protection Agency (herein EPA), and Harbor 

Freight Tools (herein HFT) are pleased to explain the emission con-

trol system warranty on your 1995 and later Small Off-Road Engine 

(herein engine). In California, the engine must be designed, built 

and equipped to meet the State’s stringent anti-smog standards.  

Elsewhere within the United States, new off-road, spark-ignition 

engines certified for model year 1997 and later, must meet similar 

standards set forth by the EPA.  HFT must warrant the emission 

control system on your engine for the periods of time described 

below, provided there has been no abuse, neglect or improper 

maintenance of your engine.

Your emission control system may include parts such as the 

carburetor or fuel-injection system, and the ignition system. Also 

included  may  be  hoses,  belts,  connectors  and  other  emission-

related assemblies.

Where a warrantable condition exists, HFT will repair your 

engine at no cost to you including diagnosis, parts and labor.

Manufacturer’s warranty coverage

The 1995 and later engines are warranted for two (2) years.  

If any emission-related part on your engine is defective, the part 

will be repaired or replaced by HFT.

Harbor Freight tools emission control defects 

warranty coverage

Engines are warranted for a period of two (2) years relative to 

emission control parts defects, subject to the provisions set forth 

below. If any emission related part on your engine is defective, the 

part will be repaired or replaced by HFT.

Содержание 65087









































Отзывы: