Pacific energy SUPER 27, Инструкции по эксплуатации и монтажу

Страница: 9 / 32

Assembly - Ash Cleanout
Pedestal Model
1. Remove the Ash Drawer Front Cover Plate by
removing the center screw(1) and lifting up to
dis-engage the bottom tab.
2. Remove the two screws (2) holding the Pedestal
Brace. Remove the brace
3. Install the Ash Cleanout System as per instruc-
tions. See "Optional Ash Cleanout System" on
page 10
4. Break off the corner tab of the Pedestal Brace
with pliersSee "Figure 3: Ped Brace knockout."
on page 9
5. Re-install the Pedestal Brace with the notched
corner to the top left. Install the new Ash Pan
into the Pedestal.
Figure 2: Ped front cover removal.
1
2
Leg Model
1. Remove the two screws holding the Leg Ash
Box Brace (2). Remove the brace
2. Install the Ash Cleanout System as per
instructions. See "Optional Ash Cleanout
System" on page 10
3. Break off the corner tab of the Pedestal Brace
with pliersSee "Figure 3: Ped Brace knock-
out." on page 9
4. Re-install the Leg Ash Box Brace with the
notched corner to the top left. Install the new
Ash Pan into the Leg Ash Box.
Figure 3: Ped Brace knockout.
SUPER / CLASSIC_030818-32 9
100000813