100216-24
13
©PACIFIC ENERGY FIREPLACE
PRODUCTS LTD.
FIG. #8
Chimney
Storm collar
* 4"(102mm) diameter air inlet with rodent screen
* If the crawl space is well ventilated it is not necessary
to extend air inlet to outside
Spark arrestor
rain cap
Radiation shield
Chimney Connector
44" (1118 mm)
Minimum
Minimum 7' (2.1m.)
Ceiling Height
Attach to floor for
mobile homes
Non-combustible
ember protector
48"
(1219 mm)
3' (914 mm)
Minimum
Hooded vent or
90 elbow turned
down
The chimney may incorporate
an offset. To do this safely, all
sections of listed connector,
offset elbows and chimney
section must be screwed
together by at least three
sheet metal screws per joint.
The chimney must be suitably
supported by the chimney
manufacturer's listed offset
support.
Unit may be harder to start.
Please provide as much verti-
cal length for the first section
of pipe as possible.
*
*
Chimney Connector
12"(305mm)
Minimum first
section of pipe.
12"(305mm)
Minimum
Wall Thimble
Listed Chimney
